Raed has another scoop.

Sloppy journalism?

Onnik Krikorian has the scoop.

There is a hole in your sock.

Who leaked such a feast?

Cylinder Horizontal warps the photograph around a horizontal cylinder.

Cylinder Vertical warps the photograph around a vertical cylinder.

Cannelloni () are a cylindrical type of pasta generally served baked with a filling and covered by a sauce in Italian cuisine.

Originally, this was all solid with a hole in it.

There's a hole here, and I shut this.

That's a lexicographical cop out, to say, miscellaneous technical senses.

There was a bullet hole in the windshield.

Cylinder mould paper machine producing a paper web .

It is rare for a player to have three pawns in a file, i.e.

A can with a little hole and some duck tape.

The water leaked because there was a hole in the channel.

The Cheroot is a cylindrical cigar with both ends clipped during manufacture.

He proposed using a spherical configuration instead of the cylindrical one that Neddermeyer was working on.

But this leaves us with a big gap in our knowledge.

You can't just drill a hole and pump it out.

GLOBO included a special report in its extremely popular weekend TV magazine FANTASTICO and here's the text (computer) translated into rough English.

And they use a red hot iron needle to make a hole through the muzzle.

And if you were to just poke a hole over here and put a third matchstick, you'll get a T joint.

Pinhole cameras can also be constructed by replacing the lens assembly in a conventional camera with a pinhole.

The plain variety is of milk white colour and comes in disc shapes of about an inch diameter and quarter of inch thickness.

That Ur was an important urban centre already then seems to be indicated by a type of cylinder seal called the City Seals.

These were replaced in 1967 by the current, cupro nickel type, along with the holed 50 yen coin.

He was also involved in the politics of Miletus and was sent as a leader to one of its colonies.

Cylinder mould for the production of ? 5 banknote paper , showing the embossed images for the watermarks .

If you are a perfectionist, multiply the bore diameter by 0.82 and subtract this value from the tube length.

Pedro Doria was the blogger who scooped the story, first publishing the critical letter by Anderson, followed by Schelp's reply.

Optimally, the size of the aperture should be 1 100 or less of the distance between it and the projected image.

Pinhole cameras can be constructed with a sliding film holder or back so the distance between the film and the pinhole can be adjusted.

A maximum is 70 of bore width is possible in racing engines, where rings are changed every few races.

The pinhole may be punched or drilled using a sewing needle or small diameter bit through a piece of tinfoil or thin aluminum or brass sheet.

The cylinder mould cover used for screening the fibres from the pulp has images embossed in a regular pattern that causes a variation in the deposited fibre mat thickness .

Sound is produced by the vibration of an air stream blowing across an open hole at the end of a resonating tube.

The ship's Gunner was informed, who in turn informed the captain...You may fire when ready...at the next high roll, the cannon would be fired.

When one pinhole is closed, the grid of wires causes appreciable diffraction in the light, and blocks a certain amount of light received by the corresponding photon detector.

In the U.S., however, the fat tends to be cut down at the butcher shop unless otherwise directed by the customer.

The ferret ( Mustela putorius furo ) is the domesticated form of the European polecat, a mammal belonging to the same genus as the weasel, Mustela of the family Mustelidae.

However, there is a mechanical limit to the width of a single exhaust port, at about 62 of the bore diameter for reasonable ring life.

In 1949, the current type of holed 5 yen was introduced, followed by bronze 10 yen (of the type still in circulation) in 1951.

For example, in the laminar flow within a pipe with constant cross section, all particles travel parallel to the axis of the pipe but faster near that axis, and practically stationary next to the walls.

It selects a point, it guides the drill to that point, it pierces the dry wall, leaving a half inch hole before traveling to the next location.