Would be a carcass on your plate.

Is that an animal carcass behind her?

The term axial pitch is preferred to the term linear pitch.

And the gears work in water as well.

This is the guys on the rope, pulling open the carcass.

JU No, this stuff will be built into the bezel of every display.

And there's Furby on the half shell.

Constructing mechanisms of this kind would have required a sophisticated knowledge of differential gearing.

Turned it upside down, experimented with the shell, experimented with the head.

You're like, You know? I think that's an animal carcass behind her.

After many years of bending gears with a pair of pliers, I made that tool, and then I made this other tool for sort of centering gears very quickly sort of developing my own little world of technology.

You can do gears and nuts and bolts that you can buy at Whole Foods.

Groups of Nile crocodiles may travel hundreds of meters from a waterway to feast on a carcass.

Skipping ahead a bit more here, this is Rony on the whale carcass.

Here he envisions the carcass of an autorickshaw he once witnessed burning in a riot.

So, we have a motor here on the left, and it goes through a gear train.

At least one aftermarket company has also developed metal replacement gears which eliminates the breakage issue.

To keep his business going, Armand shifted his focus and developed vehicles for the military.

In general, the line of action changes from moment to moment during the period of engagement of a pair of teeth.

On killing prey, the jaguar will drag the carcass to a thicket or other secluded spot.

His camera, the Megaskop, added the crucial feature of set gears which offered a relatively steady panning speed.

And the guy took it apart, and one of the things he pulled out was one of the balance wheels.

The resulting sets can then be projected back to a plane to give cogwheel diagrams with increasing numbers of teeth, as shown on the right.

There's my first exploded view and all the little pieces and the little worm drive and all that stuff.

The odometer was described as a cart with a gear mechanism that dropped a ball into a container after each mile traveled.

What I had to devise was a way of fooling the eye into believing that all these panels are curved with the shell.

What I discovered in these interiors is that there was a disconnect between the exterior shell and the interior architecture of the pieces.

In that the shell was originally conceived as a lightweight, modern, futuristic, high tech pod for hurtling down the freeway, and the interiors were completely out of sync with that.

The Alameda avenue, the railway hangars, the factory complexes, and its surrounding housing have been proposed to be placed in the list of UNESCO World Heritage Sites.

I can give you fast control with low reduction ratios in these gears, or I can give you power I can't give you both.

Gas turbine electric A gas turbine electric locomotive, or GTEL, is a locomotive that uses a gas turbine to drive an electrical generator or alternator.

That seemed really like a crisis to me, that they had never been able to develop a vocabulary about escape, and about travel, and modernity in this trailer that was consistent with the shell.

The speed in this type of motor has traditionally been altered by having additional sets of coils or poles in the motor that can be switched on and off to change the speed of magnetic field rotation.

Contemporary applications Hall effect sensors are readily available from a number of different manufacturers, and may be used in various sensors such as rotating speed sensors (bicycle wheels, gear teeth, automotive speedometers, electronic ignition systems), fluid flow sensors, current sensors, and pressure sensors.

The human like posture of bears when standing and sitting, and the resemblance of a skinned bear carcass to the human body, have probably contributed to the belief that the spirits of humans and bears were interchangeable.

All the casework is hand scribed in, uniquely, so you can't just cut 100 parts for 100 trailers, you have to cut them big, and every single one is hand fit.

From Burkina Faso, we now switch gears and move onto bi lingual Cameroon as Dibussi Tande of Scribbles From The Den goes down the memory lane to blog about Four Myths About the Unification of British and French Cameroons

In the episode they do not want to harm a real cat so they took a Build A Bear carcass, stuffed it with ballistics gel, shot it with a 20' barrel steam cannon, then made a scatter plot of the remains.

Proof of the animal's existence in mainland Australia came from a desiccated carcass that was discovered in a cave in the Nullarbor Plain in Western Australia in 1990 carbon dating revealed it to be around 3,300 years old.

Calculators By the 20th century, earlier mechanical calculators, cash registers, accounting machines, and so on were redesigned to use electric motors, with gear position as the representation for the state of a variable.

Today, the term MEMS in practice is used to refer to any microscopic device with a mechanical function, which can be fabricated in a batch process (for example, an array of microscopic gears fabricated on a microchip would be considered a MEMS device but a tiny laser machined stent or watch component would not).

The LZ 1 (LZ for Luftschiff Zeppelin , or Zeppelin Airship ) was long with a hydrogen capacity of , was driven by two Daimler engines each driving a pair of propellers mounted either side of the envelope via bevel gears and a driveshaft, and was controlled in pitch by moving a weight between its two nacelles.

Some of Archimedes' inventions as well as the Antikythera mechanism required sophisticated knowledge of differential gearing or epicyclic gearing, two key principles in machine theory that helped design the gear trains of the Industrial Revolution, and are still widely used today in diverse fields such as robotics and automotive engineering.

Micro electromechanical systems The term MEMS, for Micro Electro Mechanical Systems, was coined in the 1980s to describe new, sophisticated mechanical systems on a chip, such as micro electric motors, resonators, gears, and so on.

Trinidadian Andre Bagoo notices that he spends much of his life in a line This is the fate of a society dominated by industrial forces, forces that literally turn us into little cogs in a process that sees us as no more than just subjects subjects who must be made to line up for life.